Tribo-corrosion behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel

In this investigation , Zn-Ni-Cu and Zn-Ni-Cu-TiB₂ were coated on a mild steel specimen using a high velocity oxy fuel thermal spray (HVOF) process. The surface morphology and coated powder distribution of coated specimens were characterized using scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and X-ray-Elemental mapping. The pin-on-disc (ASTM G99-17) method was used to examine the wear resistance of the coated and uncoated mild steel specimens. Both coated Zn-Ni-Cu and Zn-Ni-Cu-TiB2 on mild steel saw reduced wear volume loss than uncoated mild steel. The coated samples of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 on Mild Steel were put through a scratch test to determine the adhesion strength of the coating with the substrate. The adhesion strength of coated Zn-Ni-Cu and Zn-Ni-Cu TiB2 mild steel was higher than that of untreated mild steel, indicating a solid link between the coating and substrate and minimal delamination. Using the Vickers hardness test to measure the hardness caused by the coating, it was shown that coated samples of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel had significantly higher hardness than uncoated mild steel. Using ASTM G1-03 and ASTM G-31 standards, a 0.2 M HCl immersion cycle test was conducted for 28 days to test the corrosion resistance of coatings in an acidic media (672Hrs). When compared to Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel, the weight loss for the uncoated mild steel was significantly larger. Additionally, XRD examination showed that coated samples had less rust on their surface than uncoated samples. Both Zn-Ni-Cu and Zn-Ni-Cu-TiB2 on Mild Steel were anti-corrosive, as evidenced by increased corrosion potential and reduced corrosion current density when compared to uncoated mild steel, according to electrochemical impedance spectroscopy (EIS)/Tafel study in 0.2 MHCl. The outcomes of each test were very encouraging and demonstrated the durability of these coatings against wear and corrosion.     

Composite Mesoporous Silica Nanoparticles with Dual-color Afterglow for Cross-correlation-based Living Cell Imaging

Room temperature phosphorescence (RTP) materials are characterized with emission after removing the excitation source. Such long-lived emission feature possesses great potential in biological fluorescence imaging because it enables a way regarding temporal dimension for separating the interference of autofluorescence and common noises typically encountered in conventional fluorescence imaging. Herein, we constructed a new type of mesoporous silica nanoparticles (MSNs)-based composite nanoparticles (NPs) with dual-color long-lived emission, namely millisecond-level green phosphorescence and sub-millisecond-level delayed red fluorescence by encapsulating a typical RTP dye and Rhodamine dye in the cavities of the MSNs with the former acting as energy donor (D) while the latter as acceptor (A). Benefiting from the close D-A proximity, energy match between the donor and the acceptor and the optimized D/A ratio in the composite NPs, efficient triplet-to-singlet Förster resonance energy transfer (TS-FRET) in the NPs occurred upon exciting the donor, which enabled dual-color long-lived emission. The preliminary results of dual-color correlation imaging of live cells based on such emission feature unequivocally verified the unique ability of such NPs for distinguishing the false positive generated by common emitters with single-color emission feature.     

电感耦合等离子体质谱（ICP-MS）法测定黄精中15种稀土元素及其指纹图谱绘制

为了准确测定黄精中稀土元素的含量,采用电感耦合等离子体质谱（ICP-MS）法同时测定黄精中15种稀土元素（La、Ce、Pr、Nd、Pm、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu）的含量,进而绘制稀土元素指纹图谱,以稀土元素含量的平均值构建黄精稀土元素标准指纹图谱,作为鉴定黄精中药材的参考依据。黄精样品采用微波消解法处理后,通过在线引入内标溶液,采用ICP-MS法测定15种稀土元素的含量,采用OriginPro 2021绘制稀土元素指纹图谱和进行主成分分析,采用SPSS 26.0进行聚类分析。15种稀土元素的线性关系、重复性、精密度良好,平均加标回收率在97.0%~103.3%,相对标准偏差小于等于1.74%。黄精中Ce、La、Nd含量相对较高,Ce含量为53.02～2004.58 μg/kg,位居第一。聚类分析和主成分分析结果表明,样品聚为2类,同一产地的样品能够较好地聚在一起。黄精药材中15种稀土元素的指纹图谱具有相似的分布形态,具有较强的特征性和一致性,相似度均大于0.950。该方法操作简单,准确可靠,能满足实验分析要求,可为黄精的质量控制和药理研究提供参考;建立的指纹图谱可用于黄精的鉴别。     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

国内CIDEP研究进展

化学诱导动态电子极化（CIDEP）是检测瞬态顺磁粒子并表征其特征的强有力的手段,对于研究光化学和光物理瞬态过程的微观机理和规律有重要意义. 本文较为详细地总结了4种常见的CIDEP机理,讨论了各种极化谱及相应的极化条件;简要介绍了国内研究小组在CIDEP理论以及在均相溶液和微复相体系中光化学过程的CIDEP研究成果.      

含有五个反馈权值的二维细胞神经网络可实现Mosaic模式

研究一类含有五个反馈权值二维细胞神经网络系统,以系统的输出反馈权值及阈值为参数构成参数空间,引入几何方法,将此空间分解分块成有限个区域,当输出反馈权值及阈值在某一区域上时,给出系统具有M osaic解所有可能的输出函数M osaic模式的充要条件.     

关于Smarandache ceil函数的一个方程

研究了关于Sm arandache ceil函数的一个方程,并用初等方法得到了它的所有解.     

n次积分C半群与抽象柯西问题的强解

给出了n次积分C半群的几个性质及其证明,讨论了它与一类抽象柯西问题存在强解的关系及强解的表示式.     

基于比率的三种群混合扩散模型的动力学行为

讨论了一类基于比率的非自治三种群混合扩散模型,三种群间既有捕食关系又有竞争关系.我们研究了该模型的动力学行为:包括一致持久性,全局渐近稳定性,周期解,概周期解的存在唯一性.表明即使食饵种群在某些孤立的斑块中可能绝灭,也可以通过适当选取扩散率来保证系统持续生存.     

六偏磷酸钠对AZ31镁合金电化学行为的影响

为提高AZ31镁合金阳极的活化性能以及抑制它的腐蚀,用电化学等方法研究了在中性3.5%Na Cl体系中,六偏磷酸钠(Na6(PO3)6)对AZ31镁合金电化学行为的影响。结果表明:Na6(PO3)6能大幅度抑制AZ31镁合金的腐蚀,但极化程度有所增大。当Na6(PO3)6的质量分数为2.0%时,AZ31镁合金的缓蚀率高达74.9%,腐蚀后其表面均匀,且活化性能有所改善,在-1.10V处时合金的电流密度高达0.033 m A.cm-2,开路电位Eocp负移程度最大(-1.59 V),活化电位Eact负移程度最大(-1.38 V)。试验结果为AZ31镁合金作为电极材料提供了参考。